메뉴 바로가기 본문내용 바로가기 주메뉴 바로가기 하단 바로가기
Cleaning solution, Introduction of Hansol Chemical Cleaning Solution
Product Inquires Data Sheets

Hansol’s Cleaning Solution is a critical material used to prevent curing in the nozzle and valve which builds up from coating
material remnants over time and consistent use.

Characteristics

  • 1. Excellent cleaning effect for conformal materials
  • 2. Prevention of curing in nozzle and valve
  • 3. Rapid penetration by low surface tension
  • 4. Low stimulation, ROHS compliant & halogen free
Position of Cleaning Solution and Coating material
Conformal coating materials, (Solvent type)
  • Dissolving / Cleaning Test Method PS-100T, HC907S 100μm coated
  • Result of Test Method Before dipping, After dipping
  • 1. Prepare that slide glass coated HC-907S which cured completely to thickness of 100um
  • 2. Dip the slide glass in PS-100T and take it out. Clean the solution on the slide glass using wiper without pressure.
  • 3. Repeat the same process until cured HC-907S id dissolved.
  • 4. The ability to dissolve can be checked by repeat counts.
  • 5. PS-100T is suitable for HC-907S, HC-S9265S, HC-S970P

Contact

담당자 연락처 정보
Name TEL EMAIL
Jin Hyuk Jang +82-2-2152-2374 jhjang@hansol.com
Jun Heon Kim +82-2-2152-2373 jhkim3@hansol.com
James Sim +82-2-2152-2371 jbsim@hansol.com
페이지 맨 위로 이동